That ram is on my qvl for 3000 series but it took docp , freq 3600 and 1.45v Pro 60 Rtt_nom off Rtt_wrt dynamic off Rtt_park auto And the rest auto But if you are not planning to upgrade cpu and bios to a 3000 series then return the ram a go with tight timing 3200 cl14 in 2x8 or 2x16. You will save on the aspirin. Most likely the board only supports JEDEC 3200 and not XMP 3200. If there's no option to select XMP profiles in BIOS, your only option would be finding JEDEC modules. Main System ( Byarlant): Ryzen 7 5800X | Asus B550-Creator ProArt | EK 240mm Basic AIO | 16GB G.Skill DDR4 3200MT/s CAS-14 | XFX Speedster SWFT 210 RX 6600 | Samsung 990 PRO 2TB Please don't go messing around in the BIOS settings, especially the voltage settings for either the RAM or the CPU, unless you know what you are doing. It is also worth noting that setting XMP profiles can be detrimental to your board. Not that everyone covers all bases. But some boards shouldn't go over 1.5V, while some specs for RAM are over To enter the UEFI or legacy BIOS during boot, use these steps: Press the Power button. See the screen splash to identify the key you must press to enter the firmware (if applicable). Press the This means the hard drive is not damaged. You may jump to Solution 3 to reset BIOS to the default state so as to getting rid of missing operating system issue. #2. The Test Failed. You should contact your hard disk or computer manufacturer for a replacement as long as these devices are under warranty. Solution 3. Set BIOS to default settings That's the setting you want. It looks like DOCP is already set to 3200MHz. Save the BIOS settings and boot the machine. Open up task manager and check the Performance > Memory tab to see what speed your memory is running at. D.O.C.P. is what Asus calls it on AMD boards. That's the setting you want. py9Irs.

setting ram di bios